Chic DIY Copper Magazine Holder: How to Make this Surprisingly Easy Piece

Copper is among the hottest metals being utilized in design nowadays. It’s in all places, in all rooms, in all quantities. Whereas it might sound a bit of intimidating to aim a DIY undertaking utilizing metallic, this one is a quick and straightforward method to get began. Really, you can begin and end your personal customized copper journal rack very quickly in any respect. So far as DIYs go, this one could be very satisfying…particularly in case your front room is in determined want of a clear-lined, understated spot to stow away your magazines and different studying supplies!

DIY Challenge: Copper & wool felt journal holder, 20”w x 7”d x sixteen”h

DIY Degree: Newbie

Supplies Wanted:

  • Two (2) 1/2″ copper pipe, 20” lengthy
  • 4 (four) half″ copper pipe, 12” lengthy
  • 4 (four) 1/2″ copper pipe, 7” lengthy
  • 4 (four) half″ copper pipe, four” lengthy (Notice: 10’ and a couple of’ lengths of 1/2″ copper pipe will present all of those items, with somewhat bit left over.
  • This was probably the most value-efficient technique I might calculate.)
  • 4 (four) half″ copper Ts
  • 4 (eight) 1/2″ copper Ls
  • 36” x 18” piece of wool felt
  • Metallic glue – not proven (elective however advisable)

Step 1: Assemble copper body. Begin by including Ls to each ends of your two 20” and two 7” pipes. Add the center a part of the Ts to each ends of your final two 7” pipes.

Add your 4 four” pipes to the Ls hooked up to the 20” pipes. Put aside.

Add your 4 12” pipes to the Ls hooked up to the 7” pipes.

Join the 7” pipes with Ts to the ends of the 12” pipes that you simply simply added.

Join your 20” segments to the Ts, in order that you find yourself with a body.

Step 2 (elective): Glue PARTS of your copper body collectively. In case your pipes match snugly into the connector items (e.g., the Ts and Ls), then you’ll be able to skip this step and transfer on to Step three. But when your body is a bit wobbly and unfastened, you’ll need to safe the connections with some adhesive applicable for metals. I used Loctite GO2 Gel.

Squeeze a little bit of glue on the within rim of any connector items which might be unfastened, then twist and safe the pipe ends inside. IMPORTANT: DO NOT GLUE YOUR 20” PIPES OR THE ADJACENT L CONNECTORS YET. You want to have the ability to take away the 20” pipes so as to add your felt journal holder, so it’s necessary that these items can come off at this level.

Step three: Sew your felt journal holding piece. Fold over the brief finish of your 18” x 36” piece of wool felt 1-three/four”. Pin this fold each couple of inches all the best way throughout.

Sew a double seam about 1/four″ from the “uncooked” finish of your folded-over felt. To do that with a primary stitching machine, merely sew one seam, minimize threads, and return and stitch one other seam very near the primary.

Repeat Step three on the opposite brief finish of your felt piece.

Step four: Assemble remaining items. Slide your 20” pipes by way of the felt seams, then safe the items together with your metallic adhesive (if wanted). Take care to maintain glue off your wool felt. Arrange your journal holder squarely towards a wall and let adhesive dry and harden utterly, as much as 24 hours.

Step 5: Load with magazines and place subsequent to the couch. When the adhesive has utterly set and dried, you’re carried out!

We expect it appears nice – easy and basic – subsequent to a front room couch. However wherever you select to place your copper journal holder, we expect you’ll be happy.

Take pleasure in your trendy new organizational system!

  • Facebook
  • Google Plus