DIY Brass Chandelier

Do you say “Sure, please!” to trendy brass lighting that you could make your self and customise to your personal area? Or perhaps you’re of the practice of thought the place DIY lighting appear overwhelming and intimidating and scary.

Both approach, you might have seen the Lindsey Adelman brass chandelier that has graced our on-line world for a few years now, not solely as a result of it’s a magnificence, but in addition as a result of it is available in a DIY package. Which could be very handy, though it’s not the route we took. This step-by-step tutorial you’re studying proper now goals to take you thru the method of constructing the brass chandelier in as easy a method as attainable, whereas maintaining your complete course of utterly custom-made. Let’s dive in.

Notice: Writer is an skilled, though not skilled, electrician. The chandelier-constructing course of is defined as clearly and precisely as potential. Contact knowledgeable with any questions or potential hazards you come throughout. Homedit is just not answerable for any injury prompted because of following this tutorial.

DIY Degree: Intermediate to Superior.

Supplies Wanted for Actual Lamp in Tutorial: (Word: Photograph proven is a unfastened information; use the textual content under for correct supplies record.) GrandBrass.com:

  • 1 x FI1/8PLUG (1/eight plug with screw driver slot)
  • 1 x RE1/8FX1/4MS (1/8f x 1/4m reducer w/ shoulder brass)
  • 2 x NI0-1/2X1/eight (1/2in x 1/eight ips nipple metal)
  • 2 x BOT2 (1/8f backside x (2)1/8f prime tapered brass cluster physique)
  • 5 x CU578 (2-1/4in cup w/ 1/8sl gap brass uncooked)
  • 5 x SR0-three/eight (three/8in slip ring w/ aspect screw brass)
  • 5 x SO10045 (Edison porcelain keyless socket 660w-250v 1/eight-27 cap)
  • 1 x NE449NP (nickel plated 1/8f through x 5/8in straight coupling)
  • three x SV140 (1/8f x 1/8f ips adjustable friction swivel brass)
  • 1 x BOLG3 ((three)1/8f sides x 1/4f backside x 1/8f prime giant cluster physique unfinished brass)
  • 1 x PIBR07-0x8 (7in x 1/eight ips brass pipe stem)
  • three x PIBR06-0x8 (6in x 1/eight ips brass pipe stem)
  • 1 x PIBR05-0x8 (5in x 1/eight ips brass pipe stem)
  • 2 x PIBR04-0x8 (4in x 1/eight ips brass pipe stem)
  • three x PIBR03-0x8 (3in x 1/eight ips brass pipe stem)
  • Amazon.com: 1 x Leviton 128-I 15-Amp 660-Watt Twin Mild-Socket Adapter – Ivory
  • Etsy.com (SnakeHeadVintage store): 1 x Ceiling Cover Wall Sconce Mount – Polished Satin Brass
  • Hardware Retailer:
  • 10’ x 18AWG white wire
  • 10’ x 18 AWG black wire
  • 2 x wire nuts (medium-sized)
  • SuperBrightLEDs.com: 6 x E27-A19DF-WW4 Heat White bulbs

Step 1: Sketch or discover a image of what you need your last chandelier to appear to be. Contemplate your area – is it lengthy and slender (comparable to over a eating desk) or extra sq. (comparable to in an entryway)? This tutorial exhibits a brass chandelier that matches into an area that’s extra sq. than lengthy, so it has three main branches. (Lindsey Adelman’s has two.)

Step 2: Loosely configure your chandelier. Utilizing the sketch/photograph as your information, loosely start to configure your chandelier with out the wire. Have enjoyable with this! The overall concepts is: the porcelain socket goes contained in the brass cup, the pipe screws into the socket, and the slip ring goes over the pipe subsequent to the brass cup. (Observe: The photograph proven above is a two-department beta model of the chandelier, not the ultimate chandelier.)

Tip: Take detailed photographs of your configuration as you go. You’ll disassemble this complete factor later, so that you’ll need to use pictures to information you.

Step three: Put together the ceiling fixture. First, ensure to flip the breaker so the electrical is off, then take away previous chandelier, if essential, and ensure the ceiling mount is safe. We needed to make a couple of journeys to the attic to safe the mount higher so the lamp would hold straight.

Step four: Do a mock-up attachment of the chandelier to the ceiling. Ensure all methods are go together with ceiling attachment and that you simply like the feel and appear of your chandelier configuration in your area. (Word: Once more, that is the beta model of our chandelier; though we appreciated the 2-department model, it merely wasn’t proper for our area. Plus, it’s trickier to wire.)

Tip: Play with the angles of the branches.

Tip: Gently and slowly spin the chandelier to align it the way you need it in your area.

Step 5: Take away chandelier from ceiling and make any configuration modifications vital. This step is elective. The photograph above exhibits how a part of our second department was eliminated and hooked up to the central hub (giant cluster physique) to type a 3rd department. This created a extra three-dimensional form, which match our sq. area.

Step 6: Disassemble foremost branches from central hub.

Step 7: Wire up one department at a time.

Step 7a: Utilizing wire cutters, rigorously minimize by way of wire casing (not the wire) about 1” from the top.

Step 7b: Pull the 1” part of wire casing off the wire.

Step 7c: Create a hook with the uncovered wire and fasten to the corresponding screw on the porcelain socket. Do that for each the black and white wires. (BLACK to GOLD, WHITE to SILVER.)

Step 7d: Working backwards, thread the wire by means of different parts on that department.

Step 7e: Put every part collectively and tighten. This will probably be your remaining tightening, so make sure that elements are straight and safe.

Tip: Take the “elbow” items (adjustable swivels) aside when wiring, then rigorously reattch them when wires are in place, as proven in pictures above and under.

Step 7f: When department is accomplished to a junction or the central hub, reduce wire whereas leaving about three” protruding.

Step eight: Wire up all branches this manner as much as the central hub.

Tip: For those who adopted this tutorial’s three-department configuration, once you’re executed wiring the branches, you must have 5 white and 5 black wires popping out of the central hub. (Notice: Though there are six mild bulbs, the dual mild socket adapter is wired as if it have been only one bulb.)

Step 9: Take away black wire casing ends and twist wires collectively. The objective right here is to have all of the branches’ black wires come collectively and hook up with a single black wire to ship up by means of the vertical pipe that connects to the ceiling wires (we’ll do the identical for white wires later). So, minimize the wires as brief as you possibly can safely handle, about three” (since you’ll need to stuff all of them into the central hub, so that you don’t need any additional…however not too brief, both!), then take away the person wire casings and twist collectively. (Notice: Push a black and white wire via the vertical ceiling-connecting pipe, then take away that single black wire casing finish so that you’re prepared to connect it to the branches’ black wire cluster.)

Step 10a: Connect single black wire to cluster. Twist the only black wire into to the cluster of black wires from the branches. Then, utilizing a wire nut, screw all of them collectively securely.

Step 10b: Safe reference to electrical tape, then push black wires and wire nut into central hub. Watch out to not sharply bend/break the wires. That is tough, take your time.

Tip: As a result of you’ll be screwing the vertical pipe part of the central hub onto the decrease portion of the central hub, and since you don’t have one sq. millimeter to spare, take a second right here to counter-twist your vertical pipe. With the only black and white wires already coming by way of your vertical pipe, and the only black wire already related, grasp the top of the only white wire and twist the vertical pipe part counter-clockwise (the course you’d use in case you have been unscrewing the hub). Your wires will twist right here, which is what you need as a result of if you screw the central hub again collectively, that may untwist the wires.

Step 10c: Connect white wire cluster with single white wire. Identical to you probably did for the black wires, you’ll now take away white wire casings, twist ends collectively, connect wire nut, placed on electrical tape, and punctiliously match all the things into central hub. Screw the hub collectively. (This isn’t straightforward, however it’s doable.)

Step eleven: Cowl final gap on central hub. Utilizing the reducer and plug items, cowl up the final gap in your central hub.

Step 12: Discover the ceiling cover and slide it onto the vertical pipe.

Step thirteen: Screw vertical pipe into ceiling mount. Watch out to not let the branches hit your face as you screw the chandelier in! Take your time, use a second set of palms if crucial.

Step 14: Wire chandelier to present mild wiring in ceiling.

Step 15: Check it out. Flip the breaker change to return energy, then cross your fingers and switch in your chandelier. Hopefully it really works like a allure! You’re so near being completed.

Step sixteen: Connect ceiling cover. I’d advocate flipping the breaker change to show electrical off right here, then connect the ceiling cover earlier than turning the electrical again on.

Step 17: Pat your self on the again for a job nicely accomplished. Take pleasure in your new chandelier and the various journeys you’re about to make into your area simply to admire it.

We hope you discover this tutorial useful and that you simply discover success in creating your personal lovely brass chandelier!

  • Facebook
  • Google Plus