DIY Expedit Bookshelf Cubby Doors

I really like bookshelves as a lot as the subsequent man – Ikea’s Expedit cabinets, to be particular, though it’s saddens me that they’re a discontinued collection. They’re splendidly useful and clear-lined. The issue, for me, lies in optimizing their performance with type…and doing it on a finances. In fact, there are a great deal of coordinating packing containers and baskets on the market to suit completely into any and all cubby squares, however what if you have already got a bunch of mismatched bins? They work simply effective, however don’t look very nicely.

Not a reasonably sight, is it? The factor is, I dislike losing issues, and I really like reusing issues that I have already got. Which is why, in the event you’re in an identical ugly-shelving state of affairs at your home, I’m going to point out you a really cheap (perhaps even free) approach to get the coordinated look you’re keen on with out having to purchase new bins in your cabinets.Able to get began? Let’s go.

Supplies Wanted:

  • Foam board (aka insulation board, bought at most hardware shops in four’ x eight’ sheets)
  • Material of your selection
  • Measuring sq.
  • Razor blade/field cutter
  • Scorching glue gun & glue sticks

Step 1: Measure the peak and width of your cubby openings. My Expedit cubbies measured thirteen.25” sq..

Step 2: Measure and reduce out the froth board. The froth will function the construction of your cubby “door.” Make these into rectangles which are the width of your cubby opening however 1” lower than the peak (thirteen.25” x 12.25”, for instance). Tip: In case your foam board doesn’t minimize exactly, change your razor blade. These things requires the cleanest and sharpest of blades with a purpose to get a clear minimize.

Tip: When measuring the width, minimize simply the tiniest bit lower than the precise width of your cubby opening. This can permit for a cosy match – however not too tight – after the material is wrapped across the foam board.

See the clear reduce? It’s because I modified my razor blade for a model new one. It’s value the additional 2 minutes, belief me.

Step three: Minimize out material. Lay down your foam board and use this to chop your material. I’d advocate a further 2” on every of the 4 sides. Tip: If utilizing material with any type of geometric sample, similar to stripes, take note of maintaining the print squared as much as your foam board earlier than chopping.

Step 3b: Examine the match of your foam board within the Expedit unit cubbies. Make certain the match is comfortable however not too tight, and undoubtedly not too unfastened. Make any mandatory changes to your measurements. (I failed to do that and ended up with one foam board being a bit too tight in order that it curves ever so barely. Study from me, buddies, and do as I say not as I do.)

Step four: Minimize out eight of every part (or nevertheless many cubbies your shelving unit has). I additionally added in some felt, minimize about eleven.25” x 10.25” (or, in different phrases, 2” lower than the peak and width of my foam boards) to function backing when all is claimed and executed. The felt is technically optionally available however extremely advisable. You’ll see what I imply in a couple of steps.

Step 5: Scorching glue reverse edges. Run some scorching glue shortly alongside one finish of your foam, then pull the material taut and clean it down. Do the other aspect the identical approach. Tip: Make certain, in case your material has a definite sample or print, that every foam board is laid on the identical approach so that you don’t find yourself with three doorways with stripes going sideways and the remaining going vertically.

Step 6: Glue the corners. Corners have to be crisp and excellent with a view to give your cubby doorways a clear look general. Begin by operating somewhat line of glue immediately onto the aspect of the froth in a single nook.

Step 6b: Fold nook into glue and clean it down.

Step 6c: Glue the highest flap right down to your foam board and clean crisply. You need minimal bumps, so run your finger alongside the sting and actually fold it down tightly. Tip: In all of this nook-gluing, be sure a number of the scorching glue attaches to the froth board itself and never simply on different glued-down material.

Step 6d: Repeat steps 6-6c for all corners.

Step 7: Glue the flap up onto the froth board. Add a drop of glue inside the underside flap of the nook and clean (do that for each corners on the sting you’re engaged on), then scorching glue all the flap up onto the froth board. Clean from the middle of the flap outward towards the corners, being cautious that the material is taut with no effervescent on the sting.

Step eight: Add a drop of glue to the nook material if crucial. You actually need the material to be comfortable towards the froth board (or different material), so if there’s a bump or bubble in any respect, lay a small drop of scorching glue down and clean the nook. Repeat for all 4 corners.

Step 9: Repeat for reverse corners and sides. Your foam board ought to now look one thing like this (though in all probability with extra equal material alignment than what I’m displaying you right here).

Step 10: Lay a bit of your minimize felt down onto the again of your board. Be certain that it matches nicely and that no sides shall be coming out.

Step eleven: Scorching glue felt onto foam board again. Once more, ensure that the recent glue attaches the felt not solely to the material but in addition the froth board itself. Tip: Run scorching glue proper alongside the sting of the felt so it’s utterly flat and safe and there’s no pulling again.

Step 12: Place foam board doorways into your shelving unit. Hopefully, in case you examined every reduce foam board earlier than you added the material, these will match completely for you.

Step thirteen: Sit again, loosen up, and benefit from the now-coordinated look of your cabinets! That additional inch up prime lets you pull the “door” off and entry the chaos beneath – time and again as wanted – with out bending your foam board.

What different price range-pleasant methods have you ever discovered to coordinate your Expedit (or comparable) cabinets?

  • Facebook
  • Google Plus