DIY Herringbone Box – A Creative Way To Add Storage And Style

Once I had a child I knew that toys can be in my house. I didn’t understand that it might overtake my house. As my youngsters are getting greater they’re able to arrange and put away their very own toys. However there’s nonetheless toys in all places. I needed to provide you with an answer that labored for me and my house aesthetically in addition to functionally.

DIY-toy-storage-solution-herringbone

I got here up with the thought of a giant storage field that would match underneath a sofa or espresso desk. However, to offer it slightly twist I needed so as to add a herringbone design to it.

To start with I chosen pine wooden boards. Two lengthy ones and one sq. measurement. For my objective I made this storage field massive, however any measurement might be executed. I minimize the longer boards right down to two 22 inch and two 24 inch lengthy items. The entire field is 7 half inches tall.

To make the nook have a cosy match I used a miter noticed, set it at a forty five diploma angle and minimize the sides of all the boards. The permits every nook to be flush collectively for a seamless nook. I used a air nailer to place in nails alongside the corners.

herringbone-DIY-box-45-angle

DIY-storage-box-45-angle-corner

nailing-45-box

The sq. board wanted to be reduce right down to measurement barely. I found out the quantity I wanted to chop by putting the field on prime of the bottom board. Tracing the within of it.

cutting-base-board-herringbone-box

After which chopping alongside my line, permitting the board to be positioned contained in the field.

tracing-baseboard-herringbone-box

herringbone-box-baseboard-fit

To ensure that the wooden wouldn’t come aside with bigger nails. I reduce 4 small triangles out and positioned them within the corners of the underside. Beneath the bottom board. I nailed the four triangles into the 4 corners on the underside. Then putting the baseboard on prime. Creating the storage field.

corner-baseboard-herringbone-connecting

Now, I might finish it right here. However like I stated, I needed to make this stand out and look interesting to my residence. It’s time to add the herringbone detailing on the entrance. I bought a gaggle of small pine wooden strips 2 inches vast.

begin-herringbone-design

herringbone-design-DIY-

I minimize a gaggle of them right down to four inches lengthy. This was the dimensions I assumed can be applicable for my specific sized field. Relying on the dimensions of storage field you’d both need longer or shorter ones. Then beginning within the center and dealing my means out, putting each bit on. The herringbone design is a staggered V formed weaving sample. A damaged zigzag, chevron like sample.

I knew there can be some cuts wanted on the edges, however to get the sample organized I laid all of it down. As soon as all was on, I glued all the ones down that didn’t have to be reduce. Utilizing wooden glue and holding down for a number of seconds to ensure it caught.

wood-glue-herringbone-design

Taking each bit that was hanging off. I traced a line alongside the sting, marking the place the minimize wanted to be. Once they have been reduce I glued these into place as nicely.

herringbone-cut-to-fit

herringbone-pre-stain

With a view to gown up this toy storage field I chosen a darkish walnut wooden stain. Put on gloves when placing stain on. Take a tender material and dip it within the stain can. Wring it out within the can after which wipe back and forth going with the grain of the wooden.

wood-stain-tutorial

If there’s any dripping, wipe it down shortly and rub it into the stain. The previous few swipes use much less stain and longer strokes to make the wipe strains disappear. I put two coats on.

I might have been carried out right here, however I used to be wanting so as to add just a bit one thing extra to it. So I made a decision so as to add some rope handles on both aspect for ease of shifting the field out and in of its spot. Additionally the mixture of darkish stained wooden and lightweight rope is a superb look.

hole-for-rope-handle-herringbone-box

I marked the place the handles ought to be. Drilled in two holes.

rope-knot-handle

Pushed the rope by way of a gap, then tied it right into a knot. Repeating on the opposite aspect. Permitting a loop for use as a deal with.

rope-handle-DIY-toy-storage-box

After which I made a decision it was sufficient. I ended up with a big toy storage field. When put beneath my espresso desk it merely appears like an ornamental piece with the herringbone element. However slide it out and all of my youngsters puzzles are in there. Ease for them to get them out, and for me to wash up. I might additionally retailer additional pillows or a blanket when not in use.

DIY-herringbone-storage-solution

IMGP1983

Discovering a solution to retailer issues, making my house slightly extra environment friendly however not compromise my type. Utilizing a herringbone design, darkish stain, and cord makes this present and on development. Combining rustic, refined, and performance!

DIY-herringbone-detail-box

heringbone-DIY-45-corner

  • Facebook
  • Google Plus