Super Simple DIY Kids Bean Bag Chair: A Step-by-Step Tutorial

Summertime is almost upon us, which, for a lot of, means youngsters out of faculty. That is such a enjoyable time of yr – numerous actions to fill their days with. However youngsters want leisure and “down” time simply as a lot as they want stimulation and train, which makes this tremendous easy DIY bean bag chair a should-do in these late spring months. When you’ve got about forty five minutes or much less and may sew a zipper, you’re greater than outfitted to deal with this fast challenge that may give your youngsters the right rest area.

They could even take a nap right here. When you have been on the fence about this DIY venture earlier than, you’re now, aren’t you?

Observe: In your reference, the kid within the pictures above is three’ tall. Be happy to regulate your personal bean bag’s measurement accordingly to greatest suit your baby(ren).

DIY Degree: Newbie to early Intermediate stitching

Supplies Wanted:

  • Two (2) items upholstery material (32” x forty five”)
  • One (1) 22” zipper
  • One three.5 cubes bag bean bag beans

Step 1: Lay out material proper sides collectively. You possibly can select two items of cloth which might be the identical, or you possibly can select to distinction the 2 items. Both approach, it’s advisable that you simply select an upholstery weight material for greatest outcomes and sturdiness.

Step 2: Reduce material to measurement. Each bit ought to be 32” x forty five”. Put together to stitch each of the forty five” sides collectively.

Step three: Sew the longer (forty five”) uncooked edges collectively. Ensure proper sides of cloth are touching one another (dealing with in), and use a reasonably small straight sew at 5/eight” seam line down each forty five” sides. Tip: The smaller the sew measurement, the extra sturdy your seam tends to be. I went forward and did a double seam to enhance sturdiness, however that’s not required.

Use a zigzag sew on the uncooked edges of your two new seam strains (down the forty five” edges) to maintain the material from fraying over time.

Step four: Lay out and fold material. Fold material “scorching canine”-type, in order that your two forty five” seams contact one another.

Step 5: Around the corners. Starting on the fold, minimize a sluggish arc in your material towards the seam strains, aiming for a complete of about 6” width off the seam edge.

Whenever you unfold your items, you have to be left with a symmetrical curve at one finish. Modify and/or trim the curve in order that it makes you cheerful.

Step 6: Sew the curved edge closed. Utilizing the identical strategies that you simply used beforehand (reminiscent of small sew measurement at 5/eight”, with a single or double seam, and zigzagged uncooked edge), sew the curved edge closed.

Step 7: Put together for zipper. At this level, you must solely have one opening in your piece; the opposite three ends ought to be sewn collectively. Lay your material down on a flat floor.

Roll your piece till the 2 forty five” seam edges match up. This places folds within the middles of your two material items.

Open your zipper a lot of the approach and place one aspect (zipper ought to be face-down) close to the sting of your material. (Don’t fear concerning the different half of your zipper at this level; we’ll get to that later.)

Pin this one aspect of the zipper in place, from one finish of the zipper to the opposite.

Utilizing a zipper foot in your stitching machine, rigorously sew the zipper half into place.

Lay your material again down on the flat floor and punctiliously pin the opposite half of the zipper onto the opposite aspect of your bean bag chair material. Sew this aspect into place. Tip: In case your zipper foot can’t sew across the zipper pull, merely sew as much as it then raise your stitching machine foot and transfer the zipper pull up or down the zipper, then decrease your stitching machine foot and proceed your zipper seam.

Step eight: Shut off prime and backside of zipper. Though they arrive with constructed-in stoppers, it’s useful to safe the ends of your zipper with a seam or two in order that the zipper stays intact over time. Earlier than you end issues off, although, be certain that your zipper is at the least partly open so you’ll be able to flip your material inside out when full!

At one fringe of the zipper, with the material folded collectively, sew a perpendicular seam over the sting of the zipper after which proceed the seam towards the fold in your material. (This seam will solely be about 5” lengthy.) Repeat on the opposite finish of your zipper. Tip: Curve the top of your seam towards the fold only a bit, solely an inch or two, to melt the nook.

Step 9: End off the uncooked edges by your zipper with a zigzag sew.

Step 10: Fill bean bag chair with “beans.” Flip your bean bag proper-aspect out, fluff out the corners, and start to fill with the froth beans. This stuff are static, so I discovered it handiest to chop a 6” gap within the plastic sack, stick the entire thing down inside my sewn bean bag chair, and work the beans out that method. Discover what works for you.

Step eleven: Zip it up and luxuriate in! Congratulations! You have got simply created a cute and cozy rest spot on your youngsters (or your self!).

I’m positive you’ll quickly discover them lounging and studying their favourite books very quickly…

…or taking a nap.

I hope you take pleasure in this DIY youngsters bean bag chair challenge and reap the various advantages of getting a delegated child-area this summer time!

  • Facebook
  • Google Plus